desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resumeplayback from each scene,
Press MARKER during playback.
MARKER
Select the blank Marker using • or V.
Then press ENTER at the desired scene.
• Repeat this procedure to set
the other 2 scenes.
Press MARKER to remove this display.
MARKER
Press MARKER during playback or stop mode.
MARKER
Press • or • to select the Marker 1-3.
• To cancel the Marker
Follow the above steps 1-2, then press CANCEL.
Notes:
• Some discs may not work with the marking operation.
• The marking is canceled when you open the disc tray or turn
the power off,
• Some subtitles recorded around the marker may fail to
appear.
o
511
To Next Page
Loading...
