Toshiba SD700KY - Connecting to a Digital AV Receiver; Connecting to a Stereo System

7
English
Connections
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
Connecting to a Stereo System
Stereo system has Dolby Pro Logic or Right/Left
Audio In Jacks
A Select one of the video connections (CVBS VIDEO
INorCOMPONENTVIDEOIN)
depending on the options available on your TV.
B Usetheaudiocables(white/red)toconnectAUDIO
OUT(L/R)jacksoftheDVDPlayertothe
corresponding AUDIO IN jacks on the stereo system
(cablenotsupplied).
Connecting to a Digital AV Receiver
Receiver has a PCM, Dolby Digital or MPEG
decoder
A Select one of the video connections (CVBS VIDEO
INorCOMPONENTVIDEOIN)
depending on the options available on your TV.
B Connect the COAXIAL jack of the DVD player to the
corresponding Digital Audio In jack on your Receiver
(cablenotsupplied).
C Set the DVD Player' s Digital Output to PCM or All
depending on the capabilities of your Receiver (see
page19{DigitalOutput}).
Tip:
-If the audio format of the Digital Output does not
match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at
all.