Toshiba SDP94DTWB - Viewing on a Connected TV

86
Connections
Viewing on a connected TV
1
Follow the steps on page
37
to select a
mode.
(Except for TV/SD-V. Pictures in TV/SD-V mode
cannot be output to connected equipment.)
2
Connect a TV to the AV OUT jack of this
player.
To video input
To analog audio inputs
To AV OUT
Signal flow
TV
Audio/video cable
(supplied)
VIDEO IN
AUDIO IN
L
R
Yellow (Video)
White (Left)
Red (Right)
Connection to
this jack
disables the
LCD of the
player.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the player to your TV, be sure to turn off
the power and unplug both units from the wall outlet before
making any connections.
• Connect the player directly to your TV. If you connect the
player to a VTR, TV/VTR combination or video selector, the
playback picture may be distorted as DVD video discs are
copy protected.
• Mode selection is not available when the AV OUT jack is
connected.
SDP94DTWBE57-100.indd86SDP94DTWBE57-100.indd86 2010/06/0816:32:202010/06/0816:32:20