(3) Remove the Diagnostics Disk from the FOD, insert the source
disk,
and
press
any
key.
The following message appears, indicating the program
has started.
[
FDD
TYPE
[
FDD
TYPE
[
FDD
TYPE
Copy
start
TRACK
XXX
HEAD X
SECTOR =
xx
[[
track,
head
=
XXX
X
]]
(4) Remove the source disk from the FOD, insert a formatted work disk,
and press
any
key.
The [[ track, head = XXX X ]] message
will
appear
and start copying
to
the target disk. When the amount
of
data
is
too
large to be copied in one operation, the message from
Step 2
is
displayed
again. After the floppy disk
has
been copied, the following message
will
appear:
Copy
complete
Another
copy
(1:Yes/2:No)
?
(5) To copy another disk, type 1 and the message from Step 1 will be dis-
played
again.
Entering 1 returns the test program to the DIAGNOSTIC
MENU.
4.
DUMP program
(1) When DUMP
is
selected, the following message appears:
DIAGNOSTICS-HARD DISK & FLOPPY DISK
DUMP
VX.XX
Drive
type
select
(l:FDD,
2:HDD) ?
(2) Select a format type number.
Ifl
is
selected, the display
will
go to Step
(5).
Select
FDD
number
(l:A,
2:B)
?
(3) Select a drive number and the following message will be displayed:
Format
type
select
(O:2DD,
1:2D,
2:2HD)
?
(4) Select a media type number and the following message will appear:
Insert
source
disk
into
drive
A:
Press
any
key
when
ready.
3-49
To Next Page
Loading...
