Toshiba T3100e - System Setup Utility; Accessing the System Setup Utility

File No.
3.24 SETUP
3.24.1 Accessing the SETUP
Press: 0 followed by Enter. You see this screen:
[[System setup]]
1. Hard disk drive = 11-Cyl=61S,h=4, S/T=17,Cap=20MB
2. Memory size
System memory = 640KB
Extended memory = OMB
Expanded memory = OMB+3S4KB
3. Internal KB type = S4 keys
4. Plasma font type = Single
5. Plasma font set = Standard
6. Display card = Internal
7. Card type in Expansion slot
S. Printer port type
9. Serial port
IRQS SIO base address
Serial A IRQ level
Serial B IRQ level
Optional port IRQ level
CGA (SO*2S)
= None
= Output port
= 3ESh
= 4 (IRQ
= 3 (IRQ
= 5 (IRQ
base address
base address
base address
i~J.moves between items, ~~ selects value
F1 exists, FS sets default, FlO records changes
960-010
= 3FSh)
= 2FSh)
= 3ESh)
This menu above shows an example of setup options as they may be
currently stored in memory.
Notice that selecting the type of diskette drive is not an
option. The T3100e automatically determines what type of
internal diskette drive is installed. Also, you don't have to
run the SETUP to use an external 5 1/4" diskette drive.
Press F1 if the setup options displayed accurately reflect your
hardware configuration and no changes are necessary. The system
restarts.
3-45