Toshiba T3100e - Cooling Fans Removal;Replacement

File No. 960-010
4.14 COOLING FANS
1. Remove the keyboard, PDP mask, PDP unit, LED board, PDP
cover with top cover, power supply unit and disk
support according to sections 4.2, 4.4 through 4.7, 4.9
and 4.11.
2. Remove the right cooling fan (A) by lifting the cooling
fan stopper (B) after unlatching the latches (C).
3. Disconnect the connector (D) from the system board
(PJ14), then remove the left cooling fan (F) by lifting
the cooling fan stopper after unlatching the latches.
(E)
(0)
Figure 4-19 Cooling fans
4. Reverse procedure to install.
4-20