Toshiba T3100e - Cooling Fan Holder and Handle Removal;Replacement

File No.
960-010
4.15 COOLING FAN HOLDER AND HANDLE
1. Remove the keyboard, PDP mask, PDP unit, LED board, PDP
cover with top cover, power supply unit, disk support
and cooling fans according to sections 4.2, 4.4 through
4.9, 4.11 and 4.14.
2. Remove the left and right cooling fan holder (A) by
lifting them after removing 2 screws (B).
3. Remove the handle (C) by shifting toward the front and
pullout after removing the cooling fan holders.
(B)
(A)
Figure 4-20 Cooling fan holder and handle
4 Reverse procedure to install
4-21