Toshiba T3100e - HDD Jumper Straps Configuration Check

File No. 960-010
PROCEDURE 6
HDD Jumper Straps Check
1. Remove the disk support (Refer to section 4.12.).
2. Check that the jumper straps are set correctly as shown
in figure 2-2 and described in table 2-6.
3. If the jumper straps are set correctly, go to PROCEDURE
7.
4. If the jumper straps are not set correctly, set them
correctly.
Table 2-6 HDD jumper straps functions
20-Mbyte (CP3022 ) 20-Mbyte (CP3024)
or 40-Mbyte
ISignall Status ISignall Status
I
E5
I
Short HSP Open
I
E6
I
Open
C/D Short
I
E7
I
Short DHP Open
ACT
Short
-
20-Mbyte (CP3022) 20-Mbte (CP3024) or 40-Mbyte
Figure 2-2 HDD jumper straps
2-30