Toshiba T3100e - New HDD Installation and Connection

File No.
960-010
PROCEDURE 7
New HDD Connection
1. Turn off the power.
2. Remove the HDD. (Refer to section 4.13.)
3. Connect a new HDD to the system board without
installing the HDD. Then connect all the FRUs removed
during HDD removal without installing the FRUs.
4. If normal operation is restored, the original HDD is
probably defective. Reassemble the system.
5. If normal operation is not restored, the system board
is probably defective. Refer to section 2.4.
2-31