Toshiba T3100e - Test and Diagnostics Programs Overview

File No.
960-010
3.1 GENERAL
This part explains test and diagnostics programs. That checks the
functions of all hardware modules of the T3100e.
There are 21 programs grouped into two modules: the service
program module (DIAGNOSTICS MENU) and test program module
(DIAGNOSTIC TEST MENU) .
The service program module is composed of 10 tasks:
1. DIAGNOSTIC TEST
2. HARD DISK FORMAT
3. SEEK TO LANDING ZONE (HDD)
4. HEAD CLEANING
5. LOG UTILITIES
6. RUNNING TEST
7. FDD UTILITIES
8. SYSTEM CONFIGURATION
9. EXIT TO MS-DOS
10. SETUP
The test program module is composed of 11 tests:
1. SYSTEM TEST
2. MEMORY TEST
3. KEYBOARD TEST
4. DISPLAY TEST
5. FLOPPY DISK TEST
6. PRINTER TEST
7. ASYNC TEST
8. HARD DISK TEST
9. REAL TIMER TEST
10. NDP TEST
11. EXPANSION TEST
The following items are necessary for carrying out the test and
diagnostic programs.
1. T3100e diagnostics disk
2. MS-DOS system disk
3. 2DD and 2HD formatted work disks (For FDD test)
4. Cleaning disk kit (For read cleaning)
5. Printer wraparound connector
(For printer wraparound test)
6. RS-232-C wraparound connector
(For ASYNC wraparound test)
Service personnel can use these programs to isolate problems by
selecting the appropriate program and operation procedures
described in section 3.2.
3-1