Toshiba T3100e - Diagnostic Operations

File No. 960-010
3.2 OPERATIONS
1. Insert the diagnostics disk in the floppy disk drive, and
turn on the power to boot the T3100e.
2. The following message will appear:
TOSHIBA personal computer T3100e DIAGNOSTICS
version X.XX (C) copyright TOSHIBA Corp. 1988
DIAGNOSTICS MENU
1 - DIAGNOSTIC TEST
2 - HARD DISK FORMAT
3 - SEEK TO LANDING ZONE (HDD)
4 - HEAD CLEANING
5 - LOG UTILITIES
6 - RUNNING TEST
7 - FDD UTILITIES
8 - SYSTEM CONFIGURATION
9 - EXIT TO MS-DOS
o - SETUP
PRESS [0] - [9] KEY
Detailed explanations of the service programs and the
operations are given in section 3.17 to 3.24.
NOTE:
(1 )
(2 )
To stop the test program:
During keyboard operation, press Ctrl + C
While running the test program, press Ctrl + Break
3-2