Toshiba T3100e - Page 59

File No. 960-010
3. Type in 1, then press Enter and the following message will
appear:
TOSHIBA personal computer T3100e DIAGNOSTICS
version X.XX (C) copyright TOSHIBA Corp. 1988
DIAGNOSTIC TEST MENU
1 - SYSTEM TEST
2 MEMORY TEST
3 KEYBOARD TEST
4 DISPLAY TEST
5 FLOPPY DISK TEST
6 PRINTER TEST
7 ASYNC TEST
8 HARD DISK TEST
9 REAL TIMER TEST
10 NDP TEST
11 EXPANSION TEST
88 FDD' HDD ERROR RETRY COUNT SET
99 EXIT TO DIAGNOSTICS MENU
PRESS [1] - [9] KEY
Numbers, 1 to 11 are diagnostic tests.
Number 88 is for setting the floppy disk drive and hard disk
drive error retry count.
Number 99 is for returning to the DIAGNOSTICS MENU.
When selecting the floppy disk test or hard disk test,
special sub-messages will appear, as described in sections
3.8 and 3.11.
4. After typing in a test number (1 to 11) of the DIAGNOSTIC
TEST
MENU, pressing Enter displays as follows:
TEST NAME
SUB TEST XX
PASS COUNT XXXXX
WRITE DATA XX
ADDRESS XXXXXX
SUB-TEST MENU :
01 - ROM CHECKSUM
02 - HW status
99 - Exit to DIAGNOSTIC
SELECT SUB-TEST NUMBER ?
ERROR COUNT
READ DATA
STATUS
TEST MENU
XXXXX
XX
XXX
xxxxxxx
The screen shown above, for example, appears when you type 1
and Enter.
3-3