Toshiba T3100e - Page 98

File No. 960-010
3. COpy Selection
(1) When COPY is selected, the following message will
appear.
DIAGNOSTICS - COPY
Type select (O:2DD-2DD,1:2D-2D,2:2D-2HD,3:2HD-2HD) ?
(2) Select a media/drive type number. Type the number. The
following message will then appear.
Insert source disk into drive A :
Press any key when ready.
(3) Remove the diagnostics disk from the FDD and insert the
source disk; press any key. The following message will
appear, then start the copy to memory.
[FDD TYPE]
[FDD TYPE]
[FDD TYPE]
Copy start
TRACK
HEAD
SECTOR
=
XXX
=
X
=
XX
Insert target disk into drive A
Press any key when ready.
[[track, head = XXX XX]]
(4) Remove the source disk from the FDD and insert the work
disk (formatted); press any key. The [[track, head =
XXX X]] message will appear, then start the copy to
work disk. When coping cannot be done with one
operation, message (2) is displayed again. Repeat the
operation. After the floppy disk has been copied, the
following message will appear.
Copy complete
Another copy (1:Yes/2:No) ?
(5) If you type 1 the display will return to the message in
(1) above. If you type 2 the display will return to the
DIAGNOSTICS MENU.
3-42