Toshiba T3100e - Page 97

File No. 960-010
2. FORMAT Selection
(1) When FORMAT is selected, the following message appears.
DIAGNOSTICS - FORMAT(Vl.OO)
Drive number select (l:A, 2:B) ?
(2) Select a drive number. Type the number and the
following message will then appear.
Type select (O:2DD-2DD,l:2D-2DD,2:2D-2HD,3:2HD-2HD) ?
(3) Select a media-drive type number. Type the number and
the message similar to the below will appear.
Warning : Disk data will be destroyed.
Insert work disk in to drive A :
Press any key when ready.
(4) Remove the diagnostics disk from the FDD and insert the
work disk; press any key.
The following message will appear; formatting is then
executed.
[FDD TYPE]
[FDD TYPE]
[FDD TYPE]
Format start
TRACK
HEAD
SECTOR
=
=
=
XXX
X
XX
[[track, head = XXX X]]
After the floppy disk is formatted, the following
message will appear.
Format complete
Another format (l:Yes/2:No) ?
(5) If you type 1 and press Enter key, the display will
return to the message in (3) above. If you type 2 the
display will return to the DIAGNOSTICS MENU.
3-41