TC Series (TCmini/TC200) Driver
GP-Pro EX Device/PLC Connection Manual
27
3.9 Setting Example 9
GP-Pro EX Settings
Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
• For External Device, "2" is fixed for Stop Bit.
For GP-Pro EX, set for Stop Bit as shown below depending on the CPU version.
• Set Wait To Send to 10ms or more.
CPU Version Setting value
TC5-02 TCmini LT3CU02D0 or later 2
less than TCmini LT3CU02D0 1
To Next Page
Loading...
