28
1
Turn on the power.
Turn on the power by following the instruction in “Turning the power on” in
p.26
.
2
Activate the connected device.
Turn on and start the connected device.
3
Select MENU language.
This projector can display the on screen language in English, French, German,
Spanish, Italian, Portuguese, Japanese, Traditional Chinese, Simplifi ed
Chinese and Korean.
(1) Press [MENU] key to display MENU.
(2) Select SETUP icon using [UP] [DOWN] or
key and press .
(3) Select ‘Language’ and press
.
(4) Press [UP] [DOWN] or
key to select desired language.
4
Select the INPUT source.
Input source can be changed using menu system.
(1) Press [MENU] key to display MENU.
(2) Select INPUT icon using [UP] [DOWN] or
key and press .
(3) Select ‘Video input’ to select video input and press
.
(4) Press [UP] [DOWN] or
key to select desired input source.
Audio input source also can be changed.
(5) Press [MENU] key to return the top of INPUT page.
(6) Select ‘Audio input’ to select audio input and press
.
(7) Press [UP] [DOWN] or
key to select desired audio input source.
Selected Audio input source is memorized for each video input.
Audio input will be changed automatically when video input source is changed.
Select input source by pressing [INPUT] key on the remote control as well.
TDP-ET10 TDP-ET20
Basic operations
or
or
To Next Page
Loading...
