To Next PageTo Next Page
Need help?Do you have a question about the Toshiba TDP-ET10 and is the answer not in the manual?
General| Contrast Ratio | 2000:1 |
|---|---|
| Resolution | 1024 x 768 (XGA) |
| Display Technology | DLP |
| Aspect Ratio | 4:3 |
| Projection Size | 30 to 300 inches |
| Lamp Type | UHP |
| Inputs | 1 x VGA, 1 x Composite, 1 x S-Video, 1 x HDMI |
| Lamp Life | 2000 hours (Standard), 3000 hours (Eco) |
Device complies with FCC Rules, subject to conditions regarding harmful interference.
Conditions under which the product requires professional servicing.
Instructions for handling broken glass components and contacting the dealer.
Prohibition of self-servicing; refer all servicing to qualified personnel.
Guidelines for optimal and safe placement of the projector.
Identifies components on the front of the projector unit.
Identifies components on the rear and bottom of the projector unit.
Identifies terminal panel ports and antitheft lock hole.
Primary buttons on the projector unit for operation and menu navigation.
Buttons on the remote control for power, input selection, and menu access.
Dedicated keys for DVD playback functions like play, pause, stop, and navigation.
Keys for selecting titles, chapters, audio, subtitles, and playback modes.
Component, Video, S-Video, and HDMI terminals for video signal input.
Terminals for computer RGB input and audio signal input.
Coaxial audio terminals and serial control terminal for connectivity.
Main power switch and AC socket for power connection and service port.
Step-by-step guide to insert batteries into the remote control.
Instructions for aiming and operating the remote control effectively.
Describes different ways to position the projector for projection.
Critical safety warnings related to projector setup and mounting.
Preliminary steps and general advice before connecting devices.
Visual guide to different types of cables used for connection.
Details on connecting video, S-video, and component sources.
Steps for connecting the power cord to the projector and outlet.
Procedure for activating the projector from standby mode.
Critical safety warnings related to lamp, ventilation, and power cord handling.
How to enter standby mode and its indicator status.
Procedure to completely turn off the projector using the main power switch.
Turning on the projector and connected devices.
Steps to access and configure DVD player settings.
Procedure for unlocking and setting a password for parental control.
Steps for loading a disc and performing basic playback functions.
General guide on navigating and using the projector's on-screen menus.
Warnings and advice regarding lamp replacement procedures and safety.
Procedure for replacing the lamp when a warning message appears.
Actions to take if glass components or the lamp breaks.
Warnings and instructions for cleaning the projector lens and main unit.
Details on power, dimensions, lamp, and terminals.
