8
IMPORTANT SAFETY INSTRUCTIONS (Continued)
19. Replacement Parts
The user may perform replacement of
the lamp but a service technician should
make all other repairs. When replace-
ment parts are required, be sure the
service technician has used replacement
parts specifi ed by the manufacturer or
have the same characteristics as the
original part. Unauthorized substitutions
may result in fi re, electric shock, or other
hazards.
20. Safety Check
Upon completion of any service or
repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper
operating condition.
21. Do not leave thermal-paper
documents or easily de-
formed items on top of the
unit or near the air exhaust
for long periods of time.
The heat from the unit could erase the in-
formation on the thermal paper, or cause
deformation or warping.
22.
Do not use the product in a
closed installation state.
Do not place the product in a box or in
any other closed installation state other-
wise it may overheat. This could result
in a risk of fi re.
To Next Page
Loading...
