To Next PageTo Next Page
Need help?Do you have a question about the Toshiba TDP-ET20 and is the answer not in the manual?
General| Resolution | 1024 x 768 |
|---|---|
| Contrast Ratio | 2000:1 |
| Dimensions | 294 x 232 x 76 mm |
| Display Type | 3LCD |
| Technology | 3LCD |
| Aspect Ratio | 4:3 |
| Projection Size | 30 - 300 inches |
| Lamp Type | UHP |
| Native Resolution | XGA (1024 x 768) |
| Inputs | VGA, S-Video, Composite Video |
| Lamp Life | 3000 hours (Eco Mode) |
Guidance on initial product setup and adherence to warnings.
Instructions on using the correct power source for the product.
Warning about direct exposure to the projector's light source.
Advice on ensuring adequate airflow to prevent overheating.
Placement advice regarding heat sources and water exposure.
Guidelines for power cord protection and preventing electrical overloading.
Actions to take if glass components like the lens or lamp break.
Instructions to refer all servicing to qualified personnel only.
Recommendations for optimal and safe placement of the projector.
Overview of different projector mounting and positioning options.
Critical safety warnings related to projector installation and mounting.
Instructions for connecting video sources via analog interfaces.
Steps for connecting the projector to a power source.
Procedures for powering on the projector via the unit or remote.
Reiteration of power-on instructions.
Instructions for selecting video and audio input sources.
Steps for safely powering down the projector.
Instructions for unlocking and setting parental control passwords.
Information on DVD disc ratings and parental control levels.
Step-by-step guide for basic disc playback.
General guide on navigating and using the projector's on-screen menus.
Selecting video and audio input sources for the projector.
Accessing and adjusting picture quality settings.
Detailed steps for selecting video input sources.
Detailed steps for selecting audio input sources.
Adjusting horizontal and vertical keystone distortion for image alignment.
Information on the projector's mercury lamp and its behavior.
Indicators for when the lamp needs immediate replacement.
Safety procedures if the lamp or lens glass components break.
Overview of the process and warnings for replacing the projector lamp.
Steps for correctly installing a new projector lamp.
Procedure for reattaching the lamp cover after replacement.
