EasyManua.ls Logo

Toshiba TDP-EW25U - The Image Adjustment Menu; The Position Adjustment Menu

Toshiba TDP-EW25U
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
39
Operations
The image adjustment menu
Use this menu to set or adjust image-related items. Items that can be set or adjusted
are marked with “Yes”, and those that cannot are marked with “No”. (When an item is
masked, it indicates that you cannot select for the current input.)
Item Description
Computer
Y/PB/PR
Video
S-video
Network
USB
memory
Contrast
Adjust the image contrast.
Lower Higher
Yes Yes Yes Yes Yes Yes
Brightness
Adjust the brightness of the image.
Darker Brighter
Yes Yes Yes Yes Yes Yes
Color
Adjust the color of the image.
Lighter Deeper
No Yes Yes Yes No No
Tint
*1
Adjust the tint of the image color.
Reddish Greenish
No No Yes Yes No No
Sharpness
Adjust the sharpness of the image.
Softer Sharper
No Yes Yes Yes No No
Picture mode
Press . Toggle the picture mode
with .
Bright/Standard/True color
Yes Yes Yes Yes Yes Yes
Advanced
adjustment
Press
to enter the
advanced
adjustment
Noise
reduction
*2
Adjust the screen noise reduction
level.
Softer Stronger
Yes Yes Yes Yes Yes Yes
R-level
Adjust red of the image color.
Less red More red
Yes Yes Yes Yes Yes Yes
G-level
Adjust green of the image color.
Less green More green
Yes Yes Yes Yes Yes Yes
B-level
Adjust blue of the image color.
Less blue More blue
Yes Yes Yes Yes Yes Yes
NTSC
mode
*3
Set the black level with .
US : NTSC (US) mode
JAPAN : NTSC (JAPAN) mode
No No Yes Yes No No
*1: [Tint] can be displayed and adjusted only when the video signal is set to [NTSC] or [NTSC4.43].
*2: [2: [: [Noise reduction] may not work depending on signal type.
*3: [NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] or
[NTSC4.43]. NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for
other languages.
Using the menus 1 (Continued)
The position adjustment menu
Use this menu to set or adjust position-related items. Items that can be set or adjusted
are marked with “Yes”, and those that cannot are marked with “No”. (When an item is
masked, it indicates that you cannot select for the current input.)
Item Description
Computer
Y/PB/PR
Video
S-video
Network
USB
memory
Phase
Adjust to eliminate flicker with Yes No No No No No
Frequency
Adjust with to eliminate periodic
patterns and flickering when fine vertical
lines appear on the screen.
Yes No No No No No
H-position Adjust the horizontal position of the
image.
Move left Move right
Yes No No No No No
V-position Adjust the vertical position of the image.
Move down Move up
Yes No No No No No
Clamp pulse 1 Adjust the clamp pulse position.
Lower Higher
Yes No No No No No
Clamp pulse 2 Adjust the clamp pulse width.
Narrower Wider
Yes No No No No No

Table of Contents

Related product manuals