use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Name :Main Function
(1) Infrared remote sensor :Senses commands from the remote control.
(2) SERVICE :Firmware update.
(3) COMPUTER IN terminal :Input analog RGB signal from a computer or other
source, or a component video signal (Y/P
B/PR) from
video equipment.
(4) S-VIDEO terminal :Input S video signals from video equipment.
(5) VIDEO terminal :Input video signals from video equipment.
(6) AUDIO IN terminal :Input audio signals.
(7) USB terminal :Connects a commercial USB memory.
To Next Page
Loading...
