Toshiba TDP-T8 - Page 39

S8 T8 T9
4-6
* Calibration Pattern should be in full screen mode, white above and black
below.
- DTV / HDTV
Equipment : CHROMA 2327 or DVD player
Test Signal : 480i, 480p, 720P, 1080i
Please ensure the projector can display DTV/HDTV signal without color or image
abnormal.
If the test result was discoloration or flickering, please return the unit back to the
repair area.
- Color Performance and contrast
Test Signal : 1024x768@60Hz (T8/T9); 800x600@60Hz (S8)
Test Pattern : 64 RGBW scale Pattern
* Please check and ensure if each color is normal and distinguishable
* If not,please adjust color Wheel index in the Factory mode. (See Page 4-7 or
Appendix for hot keys.
- Blemish (Bright)
Test signal: 1024x768@60Hz (T8/T9); 800x600@60Hz (S8)
Test Pattern: Gray 30 pattern
* Please check and ensure the unit is within the spec.
(The bright blemish should not be seen under Gray 30 pattern.)
* If out of spec, please return the unit to repair area.
- Blemish (Dark)
Test signal: 1024x768@60Hz (T8/T9); 800x600@60Hz (S8)
Test Pattern: Blue 60 pattern
* Please check and ensure the unit is within the spec.
(The dark blemish should not be seen under Blue 60 pattern.)
* If out of spec, please return the unit to repair area.
- Video
Test signal: Composite video, S-Video and Component Video
Test Pattern: NTSC, PAL, SECAM
* Please check and ensure the unit can display the video signal without color
abnormal or image abnormal issue.
* If out of spec, please return the unit to repair area.