Figure 4-7 Releasing the battery pack
1. Battery lock 3. Battery pack
2. Battery release latch
Installing the battery pack
To install a battery pack, do the following:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer.
2. Ensure that the battery pack is securely in place and the battery lock is
in its locked (
) position.
3. Turn your computer over.
Wireless WAN Device
Some models are equipped with the Wireless WAN device. This device
gives you the ability for a high-speed connection to the Internet, corporate
intranet, and your email while you are away from the office.
Installing a SIM card
To install a SIM card, do the following:
1. Click Start -> Power and then click Shut down and ensure that the
Power indicator is off.
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack.
5. Turn your computer over and then locate the SIM card slot.
User's Manual
4-25
To Next Page
Loading...
Need help?
General
