1. Click Power in the Settings charm, and then click Shut down while
holding down the SHIFT key - ensure that the Power indicator is off
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack section, if required).
5. Locate the SIM card slot.
6. Slide your SIM card into the SIM card slot with the metal connectors
facing up.
Figure 4-7 Installing the SIM Card (R940)
1. SIM Card 2. SIM Card Slot
Product appearance depends on the model you purchased.
Never allow metal objects, such as screws, staples and paper clips, to
enter the computer. Foreign metal objects can create a short circuit,
which can cause computer damage and fire, possibly resulting in
serious injury.
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
7. Press the SIM card gently until it clicks into place.
8. Install the battery pack - refer to Replacing the battery pack section, if
required.
9. Turn your computer over.
Removing a SIM Card
To remove the SIM card, follow the steps as detailed below:
1. Click Power in the Settings charm, and then click Shut down while
holding down the SHIFT key - ensure that the Power indicator is off
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack.
5. Locate the SIM card slot.
User's Manual
4-28
To Next Page
Loading...
