using the internal LCD display only
The PowerPlay™ setting under battery mode is set to Maximize
Battery Life
The Vari-Bright feature can be enabled in the Catalyst Control Center.
You can access this center in the following way:
Right-click on the desktop and click Catalyst Control Center
In this control panel:
1. Select PowerPlay™ under Power.
2. Select Enable PowerPlay check box, and then select Maximize
Battery Life under Battery mode.
3. Select the Enable Vari-Bright™ check box.
If you want to improve the picture quality under the conditions mentioned
above, adjust the setting to Maximize Quality or disable this feature.
If you want to improve the graphics performance under the conditions
mentioned above, change the PowerPlay™ setting to Maximize
Performance under Battery mode.
Intel Rapid Start Technology
Some computers in this series support Intel
®
Rapid Start Technology which
enables the computer to change to Hibernation Mode from Sleep Mode
after a specified period of time.
With the Intel
®
Rapid Start Technology, the Windows can rapidly resume
from Hibernation Mode and battery life will be longer than when in Sleep
Mode.
Intel
®
Rapid Start Technology is enabled at factory default. The computer
will switch to Hibernation Mode after two hours of Sleep Mode.
You can use BIOS Setup to enable/disable the function and change the
specified time setting from Sleep Mode to Hibernation Mode.
1. Press and hold the F2 key, and then turn on the computer. Release
the F2 key one second after the computer is power on - the BIOS
setup utility will load.
2. Select Advanced.
3. Enable/Disable Intel(R) Rapid Start Technology function.
4. You can select the period of time from Sleep Mode to Hibernation
Mode using Rapid Start Entry after. If the Immediately option is
selected, the computer will switch to Hibernation Mode immediately
after your computer goes into the Sleep Mode.
When Intel
®
Rapid Start Technology is enabled, switching from Sleep
Mode to Hibernation Mode consumes power. When you carry your
computer aboard on an aircraft or in places where electronic devices
are regulated or controlled, always power off your computer.
User's Manual 3-36
To Next Page
Loading...
