Be sure to use the function key to select the display device before starting
to play video. Do not change the display device while playing video.
Do not change the display device under the following conditions.
While data is being read or written.
While communication is being carried out.
Select HD Format
To select the display mode, follow the steps as detailed below:
1. Click Desktop -> Desktop Assist -> Control Panel.
2. Click Appearance and Personalization.
3. Click Display.
4. Click Change display settings.
5. Click Advanced settings.
6. Click List All Modes.
7. Select one of the mode at List All Modes.
DisplayPort
Some models are equipped with a DisplayPort. This port enables you to
connect an external monitor.
Connecting the DisplayPort
1. Plug one end of the DisplayPort cable into the DisplayPort on your
external monitor.
2. Turn on the external monitor.
3. Plug the other end of the DisplayPort cable into the DisplayPort on
your computer.
As the port operation of all external monitors have not been confirmed,
some monitors may not function properly.
User's Manual 4-50
To Next Page
Loading...
