Enabled The ODD tray automatically locks if vibration or
shock is detected when your computer is
powered by battery pack.
Disabled Disables ODD tray lock function.
Set the lock time for
ODD tray
Sets a period of time. When vibration or shock
stops, the ODD tray unlocks after this period of
time.
This setting is only available when the ODD tray
lock function is enabled.
Undock and Sleep
Only models with a docking port support this function.
This tab allows you to set sleep conditions when undock.
Enabled If enabled, the computer goes into Sleep Mode
when you undock the computer.
Disabled If disabled, the computer does not go into Sleep
Mode when you undock the computer.
System sleep undocking operation will function under the following
conditions:
Select Do nothing for When I close the lid by clicking Desktop ->
Desktop Assist -> Control Panel -> System and Security -> Power
Options -> Choose what closing the lid does.
Undock and Sleep setting is currently set to Enabled.
The computer’s lid is closed.
After closing the computer lid, wait a few seconds before pressing the
Eject button on the port replicator, otherwise the system may not go
to sleep.
Unexpected undocking may cause data loss on connected storage
device(s).
After an unexpected undock, there may be some delay before the
system goes into sleep mode.
Advanced
This tab allows you to set the conditions for each device or function.
You can enable or disable the device or function you selected for power
management. Disabled mode consumes less power.
If you disable a device or function, you must re-enable it before you can
use it again.
User's Manual 5-17
To Next Page
Loading...
