User’s Manual 3-3
Replacing the memory module
TECRA M1
1. Turn the computer to the normal position and open the display panel.
Tilt the display panel slightly beyond the upright position before
removing the keyboard brace as shown in the illustration below.
2. Put your fingers on both ends of the keyboard brace and remove it
carefully in the direction indicated by the arrows in the illustration below.
Removing the keyboard brace
Portégé R100 Portégé M200/M205
Removing one screw Loosen one screw
Screw
Memory module
cover
Screw
Memory module
cover
Keyboard brace
To Next Page
Loading...
