3-4 User’s Manual
Replacing the memory module
3. Remove three screws (left, center, and right) as shown in the illustration
below.
Removing the keyboard (1)
4. Lift the back of the keyboard toward you and lay it face down on the
palmrest as shown in the illustrations below.
Removing the keyboard (2)
Screws
Be careful not to drop the screws inside the computer when removing the
keyboard.
The keyboard is connected to the computer by a ribbon cable. Be careful
not to apply tension to this cable when you lift the keyboard. Do not
disconnect this cable.
Tab s
Slits
To Next Page
Loading...
