3-12 User’s Manual
Replacing the memory module
2. Seat the memory module cover and secure it with one screw.
3. Replace the battery pack as described in the User’s Guide for your
computer.
TECRA M1
1. Firmly push the memory module into the connector, matching the notch.
Press down on the memory module until the latches on either side click
into place.
2. Seat the insulation sheet to cover the module.
Portégé R100 Portégé M200/M205
Slot A
Slot A (Lower)
Slot B (Upper)
Installing a memory module Installing two memory modules
Slot ASlot B Slot ASlot B
Be sure to check that the insulation sheet is returned to the original
position to cover the memory module(s).
To Next Page
Loading...
