8-14 User’s Manual
TECRA A10/S10/M10/SatellitePro S300
SD/SDHC Card
For further information, please refer to Chapter 3, Hardware, Utilities and
Options.
Smart Card
For further information, please refer to Chapter 3, Hardware, Utilities and
Options.
Problem Procedure
SD/SDHC Card error
occurs
Remove the SD/SDHC Card from the computer
and then reinsert it in order to ensure it is firmly
connected.
If the problem persists, then you should refer to
the documentation supplied with your SD/SDHC
Card for further information.
You cannot write to an
SD/SDHC Card
Remove the SD/SDHC Card from the computer
and check to ensure that it is not write protected.
You cannot read a file Check to ensure the required file is actually on
the SD/SDHC Card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
Smart Card error
occurs
Remove the Smart Card from the computer,
make sure to confirm that the card oriented
correctly and reinsert it in order to ensure it is
firmly connected.
If the problem persists, then you should refer to
the documentation supplied with your Smart
Card for further information.
To Next Page
Loading...
