11
6-2. Adjustment of the color shading
data directly
When the gamma data is not red by the main PC
board failure or the LCD panel replacement, the color
shading data is corrected with the adjustment software
directly.
(1) Select [Shading] from the starting menu of the
adjustment software.
(2) Select a color (Red/Green/Blue) for adjustment
from the [Setting] menu.
(3) Select a level (Max/Mid1/Mid2/Min) form the
[Setting] menu.
(4) Select [Built in Signal] from [Check] menu.
(5) Input the luminous signal level on “White” box
and click [OK] button. And then click [Close].
(Note)
Set the luminous signal level of each internal level
as follows. (common to the colors)
MAX : 75%
MID1 : 50%
MID2 : 26%
MIN : 11%
(Eg.)
When [Mid1] is selected, input the signal level
50% on the box.
To Next Page
Loading...
