Why is my Toshiba TLP-T50 Projector lamp not on?
If the Toshiba Projector lamp is not turning on, it could be damaged and needs replacing. If the lamp isn't visibly damaged, inspect the lamp cover or lamp power supply. Even without visible damage, the lamp could be defective, so try testing it with a known good lamp.
What does it mean if measuring terminals TP-R TP-G TP-B on Toshiba Projector give incorrect readings?
When measuring the TP-R, TP-G, and TP-B terminals on your Toshiba Projector, if the measurements are incorrect, the Main PCB is likely faulty. If the measurements are correct, the LCD panel or PJ851/PJ901/PJ951 might be malfunctioning.
General| Brightness | 2000 ANSI Lumens |
|---|---|
| Display Technology | LCD |
| Projection Size | 30 to 300 inches |
| Resolution | 1024 x 768 (XGA) |
| Lamp Life | 2000 hours |
| Display Type | LCD |
| Lamp Type | UHP |
| Input Ports | S-Video, Composite Video |
| Output Ports | RGB (D-sub 15-pin) x 1 |
| Throw Distance | 1.2 - 11.9 m (3.9 - 39.0 ft) |
To Next Page
