Toshiba TLP-T50 - Lcd Panel

1-7
3-5. LCD Panel
Step Figure Explanation
1 <Removal>
Remove 1 screw (M3 x 6) on the lamp housing, and
remove the lamp housing.
Screw: type [M-1]
2 Remove 2 screws (M2.5 x 8SW).
Screw: type [E-1]
3 Separate the main frame and sub frame from the optical
engine block.
4 Remove 4 screws (M2 x 5).
Screw: type [E-3]
Sub frame
Sub frame
Sub frame
Main frame
Main frame
Main frame
Main frame
Main frameMain frame
Lamp housing
Lamp housing
Lamp housing