Toshiba TLP-T50 - LCD Panel

1-8
3-5. LCD Panel (Continued)
Step Figure Explanation
5 Separate the LCD panel, mask and bracket.
[Note]
Keep the mask because it is used again.
The old LCD panel and 4 screws are not used.
1 <Installtion>
Prepare a new LCD panel to be replaced.
Prepare two pairs of screws and washers ((a) and (b))
for LCD panel installation.
2 Install a new LCD panel and mask using four screws
and washers.
(a) Side Screw: type [E-4]
(b) Side Screw: type [E-5]
[Note]
LCD panel service kit.
(For upper side)
(For lower side)
( a )
( a )
( a )
( b )
( b )
( b )
( a )
( a )
( a )
( b )
( b )
( b )