26 ASC25 Instruction Manual
(3) Mounting Active Star Coupler onto a panel
For panel mounting of the Active Star Coupler, horizontal mount shall be applied using
the L-shape brackets. Do not mount the Active Star Coupler upside down or vertical position.
When the mounting of the Active Star Coupler is made by using the L-shape brackets,
remove the rubber feet at bottom of the main body.
Mounting position is illustrated below.
Horizontal mounting
Top face
Figure 9.2 Recommended mounting position
Vertical mounting
Top face
Upside down mounting
Bottom face
Figure 9.3 Forbidden mounting position
To Next Page
Loading...
