Toshiba TOSVERT VF-nC3 Manual

*1: The maximum output current may be limited or the label at the top of the unit
need be removed, depending on the operating conditions.
*2 You can use the Monitor mode through RS485 communication.
1. VF-nC3 can be controlled simultaneously through RS485 communication.
2. Each inverter can switch among multiple motors if their operations do not overlap in the course of a work
process. The VF-nC3 can toggle between the basic settings for two motors.
3. VF-nC3 units can be installed side by side to save control panel space.

Toshiba TOSVERT VF-nC3 Specifications

General

Brand	Toshiba
Model	TOSVERT VF-nC3
Category	Inverter
Language	English