Listening to Bluetooth?Music
In order to use the unit for music playback functions through Bluetooth? the speaker mustfirst be paired with the
Bluetoothdevice.
Pairing:
1 . Press and hold the Power button on the underside to turn on thespeaker.A Power on sound is heard.
Bluetooth?function will go into pairing mode and the blueLED will keep flashing.
2. Follo
wing the instructions in your device's user manual, activateBluetooth?on your device and search for othe
r
devices.Once yo
u have found "TY-WSP21”, pair with the speaker.
•A pass code is not required.
Once connected, a pairing successful sound is heard.
•The blue LED of the speaker w
ill remain lit.
Infor
mation:
•
This speaker will pair with the last connected device when that device is in range.
• The Bluetooth?pairing can be canceled by pressing and holding the Power button for1 second. (Pressing and holding
the Power button for 2 seconds or more turns off thespeaker.)
•
The speaker will be turned off if no device has been paired for more than 15 minutes
.
Pla
ying BluetoothMusic:
Once your device and the speaker are paired, you can play music on this speaker throughBluetooth
1 . Press the Play/Pause button either on your device or this speaker toplay or pause music.The blue LED will flash
once per 5 seconds while in the Play mode.
2 Adjust the volume level on your device.
Note
•
The speaker will be turned off if it has been in the Pause mode for more than 30
minutes.
Turning off the power
1 Press and hold the Power button on the underside for 2 seconds ormore to turn off the speaker.A Power off sound is
heard.
Playing line-in Music
You can connect an MP3 player or other portable audio device to this speaker via the Line-insocket.
Note
• Use the provide
d Micro USB – 3.5 mm plug cable. The Line-in socket cannot be used witha commercially
available
cable.
1 .Plug the Micro USB plug into th
e USB socket using the provided Micro USB-3.5mm plug cable. The speaker will
turn on automatically.
2 . Plug the 3.5
mm plug into the headphone or line-out jack on yourdevice.
3. T
urn on and play your de
vice.
4.
Adjust the volume level on
your device.
Note
• Since the USB Charge cable ca
nnot be used while the Micro USB – 3.5 mm plug cable isbeing used, you cann
ot
charge the speak
er.
Changing the decoration ring
You can change the decoration ring according to your preference.
1 . Turn the decoration ring anticlockwise to release it.
2 . Replace the decoration ring and turn it clockwise to lock it.
Outdoor use/using in places where water drops may fall on the speaker
To Next Page
