Need help?Do you have a question about the Toshiba UPSMON PRO T1000 Series and is the answer not in the manual?
General| Category | UPS |
|---|---|
| Capacity | 1000VA/600W |
| Input Voltage | 220/230/240 VAC |
| Output Voltage | 220/230/240 VAC |
| Communication Interface | USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -15°C to 45°C |
| Model | T1000 Series |
| Frequency | 50/60 Hz |
| Battery Type | Sealed lead-acid (maintenance-free) |
| Humidity | 0% to 90% non-condensing |
Instructions on how to launch the UPSMON-PRO software.
Steps to establish a connection between the software and the UPS.
Shows detailed information about the UPS's current operational state.
Configures automatic shutdown parameters based on power failure or battery status.
Sets up a command file to run before OS shutdown.
Defines the delay for the UPS itself to shut down after PC shutdown.
Accesses and displays historical UPS event logs.
Shows UPS information graphically, including voltage and load levels.
Configures SMTP server details and recipient information for email alerts.
Tests the email configuration to ensure alerts are sent correctly.
Manages different types of UPS battery self-tests.
Configures power saving and controls audible alarms for UPS events.
Controls individual UPS outlets and shutdown sequences for connected devices.
Configures the primary PC (Host) and other PCs (Clients) for network monitoring.
Displays current operational parameters like voltage, capacity, and load.
Connects and monitors the UPS using the Linux application.
Configures recurrence, occurrences, and types of UPS events.
Synchronizes OS shutdowns among UPSMON-PRO clients with the host.
Enables and configures the Web Server UPSMON Function for remote access.
Details the IP address, port, username, and password for web access.
To Next Page