20
drainage port
drainage port
drainage
pipe clip
screw
3) Plug back the rubber plug to the port. The unit will resume operation in 3 minutes.
Note: You can also insert a drain hose (included) to the port to aid drainage.
Here, you will need to insert the hose to the port first before operation and
secure it with a pipe clip. Then, attach it to the drainage pipe clip at the back
of the machine. When draining, remove the hose from the clip and water will
flow from the pipe.
Continuous Drainage
Water can be drained into a floor drain by attaching a drain hose (included) to the
continuous drain port.
1. Remove the continuous drain cap by turning it counter-clockwise.
To Next Page
Loading...
Need help?
General
