17
Installing in Sliding Sash Windows
9. Cut Sponge A to the width of your window to seal the gap between the upper
part of the inner window sash and the outer window sash.
sponge A
outer window
inner window
10. To prevent the window from sliding vertically, fix the inner window in place by
using the window bracket and screw. The placement of the bracket will differ
depending on whether you have a plastic or wooden window.
window sash
plastic window
wooden window
window bracket
clasp
rear connector (lower)
rear connector (upper)
1. Assemble the rear clip by snapping the Joint B and Joint C together.
To Next Page
Loading...
Need help?
General
