20
9. Cut Sponge A to the width of your window to seal the gap between the
inner window sash and the outer window sash.
10. To prevent the window from sliding horizontally, fix the inner window in place by
using the window bracket and screw. The placement of the bracket will differ
depending on whether you have a plastic or wooden window.
8. Close the window sash tightly
against the assembled window
panel.
sponge B (adhesive)
7. Cut Sponge B to the height of your
window and attach to the assembled
window panel.
outer window
sponge A
inner window
window
sash
plastic window
wooden window
window bracket
To Next Page
Loading...
Need help?
General
