28
Indoor Unit Installation
1. Select an Installation Site
Refer to the following
diagram to ensure proper
distance from walls and
ceiling:
Minimum 6 in (15 cm)
Minimum
6 in (15 cm)
Minimum 98.5 in (250cm)
Minimum
6 in (15 cm)
Before installing the indoor unit, you need to check the label on the
product box and make sure that the model number of the indoor unit
matches the model number of the outdoor unit.
An appropriate install location should follow
these standards:
● Convenient drainage for water condensation.
● Convenient to connect the outdoor unit
● Near a properly-grounded wall outlet
● Not easily accessible for children.
● Strong enough to support the weight of the unit.
● Away from other electric appliances (e.g. TV, radio, computer, etc.)
● Not near fluorescent lamps.
DO NOT install the unit in the following locations:
● Near strong heat sources or where vapors, flammable or explosive gas,
or volatile objects can be spread in the air.
● Near high-frequency devices such as welding machines or medical equipment.
● Corrosive environments such as the laundry room or swimming pool.
● Any filled with oil,
sulfurated gas or fumes in the air.
● If placed under 250cm, the cooling
effect of the air conditioner cannot
be fully utilized.
To Next Page
Loading...
Need help?
General
