33
7. Extend the pipe by unwinding it
● Extending the pipes should be clung to the wall, bent slowly. The minimum
radius of bending the pipe should not exceed 4 in (10 cm).
● If the pipe is repeatedly bent or extended, it will become hard and difficult to
manipulate. Avoid bending or extending the pipe for more than 3 times.
● Make sure the pipe connector is protected from dirt and debris when the pipe
passes through the wall. Covering the connections with tape could do the trick.
indoor
bundle
of pipes
outdoor
sealing gum
upper hook
lower hook of
wall-mounting frame
To Next Page
Loading...
Need help?
General
