Chapter 2
Installing the MP/8 V. 34 modem
Requirements
A computer or terminal with a serial port that uses
standard EIA RS -232 signaling.
A serial cable with a male DB -25 connector on one end and
a connector that is appropriate for your computer’s serial
port on the other.
A Phillips screwdriver.
If you’re rack -mounting the MP/8 V.34 modem, screws that
are appropriate for your equipment rack.
Computers or terminals with up to eight serial ports that
use standard EIA RS -232 signaling.
Package Contents
The package contains the following items:
♦ Total Control MP/8 V.34
♦ Power cable.
♦ RJ-11 telephone cables
♦ Rack mounting brackets and screws.
♦ Rubber feet.
♦ This manual.
♦ MP/8 V.34 Modems Command Reference manual.
To Next Page
Loading...