Page 12.3
Calibrating the Temperature and Humidity SensorsCalibrating the Temperature and Humidity Sensors
After calibration is complete, press the MODE button once to return to
normal operation.
Under normal circumstances it will not be necessary to adjust the
calibration of the temperature and humidity sensors. If calibration is
required, please contact a trained HVAC technician to correctly
perform the following procedure.
MODE
Place the thermostat in the
OFF mode.
TOTALINE
12
FAN
MODE
Press and hold the MODE
button. While holding the
MODE button, press and hold
the FAN button for 5 seconds.
All icons will appear on the
display.
OFF
I2:00
72
Pm
Su
CALIBRATE
PRESS
TWICE
Press the UP and DOWN buttons
at the same time twice. The
thermostat temperature will be
displayed and may be calibrated
using the UP or DOWN buttons.
THERMOSTAT SENSOR
Evening
FanOn
AUXHEAT
COOL
AUTO
OFFON
Morning
DayNight
Am
I8:88
Service Filter
Program On
StartStop
I88
Setup
Outside
Pm
88
88
To Next Page
Loading...
Need help?
General
