To Next PageTo Next Page
Need help?Do you have a question about the TOTALINE Signature and is the answer not in the manual?
General| Brand | TOTALINE |
|---|---|
| Model | Signature |
| Category | Thermostat |
| Language | English |
Details the physical buttons on the thermostat's front panel and their functions.
Explains the meaning of icons, indicators, and information shown on the thermostat display.
Instructions for setting the current time on the thermostat for accurate operation and scheduling.
How to choose between heating, cooling, auto, or off modes for system control.
Adjusting the target heating and cooling setpoints for optimal comfort.
Guide to operating the thermostat's fan for automatic or continuous air circulation.
Detailed procedure for setting the current time and day on the thermostat.
Configuring the thermostat for programmable or non-programmable operational modes.
Setting up the thermostat for manual mode switching or automatic heat/cool changeover.
How to select and switch between heating, cooling, auto, and off operational modes.
Adjusting the target heating and cooling setpoints for optimal comfort.
Instructions on how to check the current outside temperature using an optional sensor.
Step-by-step guide to program distinct heating and cooling setpoints for different times of day.
How to control the fan for automatic or continuous operation using the FAN button.
Configure a delay for fan operation after a cooling cycle ends to improve efficiency.
Managing the thermostat display's backlight for visibility and power saving.
Switching the temperature display between Fahrenheit (°F) and Celsius (°C).
Securing the thermostat controls to prevent unauthorized changes or accidental adjustments.
Configuring and resetting the alarm for filter replacement based on fan run-time.
Setting and resetting the alarm for UV light replacement based on operational days.
Checking the thermostat's jumper settings related to heat pump and reversing valve configuration.
Verifying the jumper setting that controls fan operation during electric heat demand.
Instructions for activating and operating the emergency heat mode on the thermostat.
Setting the minimum temperature difference between heat and cool setpoints to prevent short cycling.
Limiting the number of times the HVAC unit can energize per hour for efficiency.
Configuring the temperature deadband for multi-stage heating operation.
Restoring all thermostat settings to their original factory default values.
Procedure for adjusting the temperature sensor calibration, typically performed by a technician.
Details the RJ11 jack for connecting wireless communication or programming devices.
Information on using an IR remote control for thermostat operation.
Using the EZ Programmer to store and transfer thermostat programming data.
Information on connecting the thermostat for web and phone-based control.
