TOTALINE Signature User Manual

ENTER EMERGENCY HEAT: Only available if you have a Heat Pump
installed. To initiate the Emergency Heat feature, press the EMER
HT. button. The Cool setpoint display will read ‘EH’
(emergency heat).
Press for
Emergency Heat
HEAT
I2:00
73
Pm
74
Page 10.4
OPERATION: During Emergency Heat operation the
thermostat will turn on the fan and the 2nd stage of heat
when there is a demand for heat. Also during Emergency
Heat the 1st stage of heating or cooling will be unavailable.
EXIT EMERGENCY HEAT: Follow the same steps as entering
Emergency Heat by pressing the EMER HT. button. During
Emergency Heat, only OFF and HEAT modes are available by
pressing the MODE button.
Using Emergency HeatUsing Emergency Heat
TOTALINE
10
EMRG HT.
OUTAN

TOTALINE Signature Specifications

General

Brand	TOTALINE
Model	Signature
Category	Thermostat
Language	English