TOTALINE Thermostat User Manual

.Outdoor T&mperatu'.
Oisplay shows the
outdoor temperature
...
'Eneroy Savlnot IndIcator
lights up when system is
operating at maximum
efficiency.
.-,
~51red T~turt
DIsplay shows the desired
...temperature sening on the
.##~LCDreadout.
F.n Button chooses
between ON or AUTO
fan operatioQ
'"
...
--.Room Temperature
---Display shows the current
room temperature on the
LCD readout
~ .Trouble IndIcator alerts
you when the system needs
professional service
~wt FIIIM But1Of1
restar1s the timer that.. "
determines the next air
filter change or
cleaning
,
Mode But10n selects' ~ " ~ Up and Down Buttont
between OFF HEAT Increase or decrease the
COOL, and AUTO' , desired lemperature
operation Heat pump ' ,6.. ...senlng
thermostat models. Auxiliary Heat Indicator lights up Clean FItter Indl<:.8tor leIs you
include an EMER. when a heat pump syslem's auxiliary know il IS lime 10 clean or replace
GENCY HEAT mode heat is on. your system's air filler
NOTE No1 all messages displayed In the above IllustratIon W111 awear at once in any SIluation
A\lallable on selec1ed n'(xjels

TOTALINE Thermostat Specifications

General

Brand	TOTALINE
Model	Thermostat
Category	Thermostat
Language	English

Summary

Setting and Operating the Thermostat

Setting Indoor Temperature Set Points

Adjusts the desired heating or cooling temperature set points on the thermostat's LCD display.

Setting Fan Operation

Configures the fan to operate continuously (ON) or only when heating/cooling is active (AUTO).

Setting Mode Operation

Selects the system's operating mode: OFF, HEAT, COOL, AUTO, or EMERGENCY HEAT.

Checking Outdoor Temperature

Displays the current outdoor temperature on the thermostat's LCD readout.

Clean Filter Feature

Notifies when the air filter needs cleaning or replacement and how to reset the indicator.

Automatic System Changeover

Troubleshooting Common Issues

Auxiliary Heat Indicator

Explains the AUX HT indicator for heat pump systems operating on auxiliary heat.

Clean Filter Indicator

Informs about the FILTER indicator for air filter maintenance and reset procedure.

Power Outage Handling

Details how the thermostat maintains settings during a power outage using internal power.

System Error Message Handling

Describes error readings (E2, E3) and sensor failures, advising dealer contact.

Warranty Information

Common Terms and Finding Them

Auxiliary Heat Explanation

Defines auxiliary heat as a supplemental source for heat pumps in cold weather.

Clean Filter Explanation

Explains the air filter's importance and the function of the clean filter indicator.

Fan Operation Modes

Describes continuous vs. automatic fan operation for air circulation and energy savings.

Mode Settings

Details available system modes like OFF, HEAT, COOL, AUTO, and EMERGENCY HEAT.

Outdoor Temperature Display

Explains how to view the outdoor temperature by pressing UP and DOWN buttons.

Set Points

Defines heating and cooling temperature set points and how to check them.

Temperature Sensor

Describes the sensor that measures current indoor or outdoor temperatures.

Up and Down Buttons

Explains the function of these buttons for adjusting temperature set points.