clean FILTER indicator and restarts the
system. Press the RESET FILTER button
after you've cleaned and replaced the
system's air filter.
Set Points Pg. 1
The heating and cooling temperature
set points you wish the system to
maintain and have entered into the
thermostat. The actual room
temperature will automatically be
displayed, but you can check the
desired temperature by pressing either
the UP or DOWN button. While the SET
TEMP indicator is lit, press the MODE
button to display the desired
temperature set points for the other
mode.
Temperature Sensor Pg. 7
The temperature sensor measures the
current indoor or outdoor temperatures
which are displayed on the thermostat.
Up and Down Buttons Pg. 1
These buttons are used to set your
desired temperature set points.
This is no ordinary thermostat. We listened to the
needs of homeowners nationwide and delivered a
product to meet those needs. The result is an elegant,
highly efficient control that's easy to use while blending
in with your decor to give you highest comfort with
lowered energy use.
Rev. A 12/98
CaIak)Q ~. 997-550011-19
Replacement ComlXJnents Division
@ Carrier Corporation 1996
To Previous Page
Loading...
